Trap for wild boars and deer Strong footboard + pedestal set
Trap for wild boars and deer Strong footboard + pedestal set
- 出荷日目安:
- Ships within 1-2 business days
よく一緒に購入されている商品
商品説明
This is the sales page for a set of the most popular tying trap strong type, which includes a treadle and a base. Three sizes are available, so please choose the size that fits your springs and local regulations.
Please check before ordering
The diameter of the trap varies depending on the area where the trapping activity is conducted. Please check in advance which of the following 1 to 3 applies to you and select the appropriate size.
1: In areas where traps with a ring diameter (or short diameter in the case of oval traps) of more than 12 cm are prohibited in order to prevent the misidentified capture of black bears and other predators.
2: Areas where the restrictions in 1 above have been relaxed and traps with a ring diameter (or short diameter in the case of oval traps) of more than 15 cm are prohibited.
3: Areas where traps with a ring diameter exceeding 12 cm can be used to capture the increasing number of wild boars and Japanese deer.
*Regulations may vary by area even within the same prefecture. For details, please contact the local government division in charge of the area where the trapping activity will take place.
Sold separately as a treadle + pedestal
This page is a single sales page for the footboard and base. Recommended for those who make their own springs or those who want to replace the broken treads. * When setting up, it is necessary to set the tread and spring. Click here for a product that includes a tread and pre-assembled springs.
tread
Bury the attached PVC pipe pedestal in the ground and place the footboard part on it. When the animal steps on the tread, the tread drops into the pedestal and the rail bounces upwards.
spring part
This is an essential part of the tying trap, consisting of a wire and a spring, etc. The loop of wire (snare), which is used to tie the animal's leg, is attached to the rail of the springboard, which compresses the spring.
Features of Tying Trap Tread Strong
Planks are not made of wood but resin
The treadle board part has been improved from the conventional wooden to resin. The new treads are more durable than the wooden ones, and since they do not absorb water, there is no longer any risk of malfunction due to swelling or peeling caused by water absorption. The new version is also improved to cope with rainy and snowy conditions.
Outburst Prevention Mechanisms
A safety device (holding bracket) is provided to hold down the rail (the part to which the foot-anchoring wire is attached) to prevent malfunction. It can be carried safely even with force applied to the spring. After installation is complete, simply remove the hold-down bracket to complete the set-up.
You can adjust the load that triggers the trap.
The treadle set consists of a treadle that the beast steps on and a PVC tube that serves as a base. The base has six holes to which toothpicks can be pointed, and the load under which the treadle falls can be adjusted by the number of toothpicks that are pointed into the PVC tube.
We also sell replacement trap parts.
The treadle can be used many times unless it is broken, but the parts used for the spring portion are consumable. Replacement parts are also available.
Components of a tying trap
Product specifications
Size | Pedestal height: 7.5 cm (S), 8 cm (common for M and L) |
---|---|
Country of origin | Japan |
Accessories | Instruction manual |
Size | S: 12 cm (short diameter), M: 15 cm (short diameter) x 20 cm (long diameter), L: 18 cm (short diameter) x 22 cm (long diameter) |