Standard base post (1 set)

*The post on the left side of the photo is fixed to the pipe using a flat screw, and the right side is fixed to the pipe using a band.

“There were countless birds perched on the handrails, and we were struggling to find a solution. It can be installed on the handrail, and the handrail can be used even after installation, so we adopted a bird repellent wire. After installation, the damage was drastically reduced, and I am satisfied because the handrail can be used without problems. 』

“The installation area was dotted with circular and curved handrails, but by arranging the pillars in small intervals in the circular and curved sections, we were able to install them without any gaps for pigeons to stop. 』

●Stand up pillars at 2m intervals and stretch the wires.

●Use a spring every 4m. For example, if you use three posts at a height of 4m, you can simply pass the wire through the hole in the center post. However, when stretching the wire in an L-shape or U-shape, be sure to use springs at the corners.

●Also, please be sure to use the struts for the terminal struts.

●The spring can be either a spring or a one- touch spring . When using the spring, prepare the same number of sleeves ( aluminum sleeves or stainless sleeves ).

★ Installation example for 10m

1: Bird repellent wire A wire that is stretched to prevent birds from flying.
Click here for a list of wire products

2: It is a spring for stretching the spring wire with appropriate tension.
Click here for a list of spring products

3: It is a prop to stretch the prop wire. Various types are available depending on the installation location.
Click here for a product list of struts

4: Used as necessary when installing in a bandpipe-like location.
Click here to purchase the band