Boar hoihoi tread for tying traps (tread only)

The entire treadle is made by molding with resin, and the unit price is low. There is a rule that up to 30 traps can be set per person, but if you set a large number of traps, the cost will be high. In such a case, this product is recommended for those who want to reduce the cost as much as possible.

*This product is only a footboard and does not come with a base. If you would like to purchase the pedestal as a set, please select this option.

Please check before ordering

 

Currently, this product is available in two sizes: L size (17.4 cm in diameter) and S size (12 cm in diameter). Please use size S for the area of 1.

Sale of treads only

This page is a single sales page for the footboard only (no pedestal) . Click here for the sales page with a pedestal, and here for the sales page with the pedestal only.

tread

Bury the provided PVC pipe pedestal in the ground and place the treadle section on top of it. When the beast steps on the treadle, the treadle falls into the pedestal and the rail bounces upward.

Tying trap installation and operation video

spring part

This is an essential part of the tying trap, consisting of a wire and a spring, etc. The loop of wire (snare), which is used to tie the animal's leg, is attached to the rail of the springboard, which compresses the spring.

Tying trap capture video

Characteristics of wild boar hoihoi treads

Very inexpensive due to resin molding!

The mold is made under the supervision of a skilled hunter, and is designed to be very inexpensive and extremely easy to install. Since it is inexpensive anyway, it can be used easily. It can also be used for testing and adjusting trap improvements outside of the main production line. It is a very cost-effective product that can be used with a great deal of enthusiasm.

Not affected by the weather!

Since it does not absorb water, there is no need to worry about malfunction due to swelling or peeling caused by water absorption. The flip-up type (flip up like tiger shears) is easy to use and has been well received for its ability to handle rainy and snowy conditions.

You can adjust the load that triggers the trap.

The treadle set consists of a treadle part that the animal steps through and a PVC pipe that serves as a base. This product has a screw on the treadle side, and the load is adjusted according to the tightness of the screw. The load can be adjusted to operate with very light force or only with heavy force.

We also sell replacement trap parts.

The treadle can be used many times unless it is broken, but the parts used for the spring portion are consumable. Replacement parts are also available.

Components of a tying trap

We also recommend a DIY kit that is a bargain with each component set.

01: Push spring 02: Wire rope 03: Aluminum sleeve 04: Sarkan

05: shackle 06: tie fitting 07: stopper (single) 08: stopper (double)

09: PVC pipe set 10: Footboard