Apollo Electric Fence Bilibili Band Hole Punch 14mm BRB-P14

Apollo Electric Fence Bilibili Band Hole Punch 14mm BRB-P14

出荷日目安:: Ships within 3-4 business days

選択してください

Apollo bilibili band hole punch 14mm BRB-P14 - ¥950

Product variants

¥950

~~¥950~~ ¥950

Sale Sold out

Shipping calculated at checkout.

Quantity

見積もり・お問合せはこちら

View full details

商品説明

Shut out small animals such as monkeys, raccoons, and raccoons! !

Conventional twisted wires are not suitable for small animals that pass between the wire and the ground because they are electrocuted by touching the wire and the ground at the same time. Because it flows, when a small animal, such as a monkey or a raccoon, tries to climb a tree to pick fruit, it will be electrocuted as soon as it touches the tape.

*This product is a main insulator only. The main body of the area system, the bilibili band, and the high-voltage cable are sold separately.

Example of installation method for each animal

Wild boar countermeasures (two-tiered)

Wild boars have very sensitive noses, so the fence should be placed at the height of the nose. *Even if you try to hit the body, the effect will be diluted.
Drive the post (FRP pole in the figure) 20 to 30 cm into the ground. The standard distance between poles is 200-400cm (adjust according to the terrain). Install two insulators per pole at intervals of 20 cm. Connect the connecting lines at intervals of 50 meters.

Measures against deer (4 layers)

Install the fence line at a height where you cannot pass through the lower row and at a height where you cannot jump over the upper row.
Drive the post (FRP pole in the figure) 20 to 30 cm into the ground.
The standard distance between poles is 300-400cm (adjust according to the terrain). Install 4 insulators per pole at intervals of 30 cm. Connect the connecting lines at intervals of 50 meters.

Measures against monkeys (8 columns)

Install it in a position where it cannot jump into, such as a tall tree or a telephone pole. Drive the post (FRP pole in the figure) 20 to 30 cm into the ground.
The standard distance between poles is 300-400cm (adjust according to the terrain). Install 8 insulators per pole at 20cm intervals. Use two connection wires as a pair and connect them at intervals of 50 cm (+ and - are connected at different levels).