Chainsaw sharpener pole 4.8mm type Tsumura Steel Co., Ltd. Tsumura TK-301-2

●Although the cutting edge and depth gauge had to be sharpened separately, the special CBN wheel has a grinding wheel electrodeposited on the bottom in addition to the 4.0φ, 4.8φ, and 4.8 parts on the outer circumference, so the depth gauge is always 0.6mm. will be adjusted to
●The motor switch rotates in the opposite direction, and the right and left cutters are scraped from the inside to the outside.
●The sharpener of the chainsaw guide bar can be sharpened by pressing the angled base without swaying and accurately lowering the level and hands by 10 degrees.
●Place the stopper on the back side of the blade to determine the distance of the whetstone.
*Saw chains for cutting bamboo cannot be sharpened.