Electric Fence Boju-kun Solar 1500 (Body Only) Next Agri
Electric Fence Boju-kun Solar 1500 (Body Only) Next Agri
- 出荷日目安:
- Ships within 3-4 business days
使いやすい
電気柵有効距離 約1,500m
電気ショックを送るための電源本体と、危険表示板、アース棒、出力ケーブルがセットになっています。
本体1台あたりの最大電線長は1,500mです。
商品説明
Please check before ordering
○It is the sale in the body simple substance. If you are looking to purchase poles and wires, please see this page where you will find all the materials you need to install an electric fence.
○The maximum cable length per unit is 1,500 m. ( Total cable length 600m type and total cable length 3,000m type are also available.) *Varies depending on installation conditions.
○With battery for solar panel & solar charge. If you are worried about lack of sunlight, use an AC adapter (sold separately). Please also use
○ Install the main unit in a position as high as possible, taking into consideration the amount of sunlight. Install the solar panel in a location that faces due south and is not in the shade. If the installation direction or the panel surface is shaded, the charging may be insufficient.
○Although this device is rainproof, install it on a brick or a wooden pole to prevent it from being submerged in water.
○ Please install a caution signboard using an electric fence (also included with this product) in a position where people can easily see it.
○Please be careful not to allow children to come near the installation location.
to install an electric fence
To install an electric fence, you need a main body (power supply) set and an electric wire set (electric fence rope, insulator, post, gate clip). *Please note that struts, insulators, and gate clips are not compatible with other manufacturers.
Main unit (power supply) set
A power supply unit for sending electric shocks, a hazard sign, a grounding bar, an output cable, a main unit mounting bracket, and a voltage detector (tester) are included in the set.
electric wire set
Please combine the rope (electric wire) for transmitting electric shock, the strut for stretching the rope, the insulator, and the gate clip to be installed at the entrance according to the length of the electric fence you are using. Also sold as a set.
Repel beasts with simple controls
High power specification with good cost performance
The maximum voltage is about 9,000 V with a compact body. Since it is solar powered, it can be used in places where there is no power supply. It can also be charged with a 100V power supply using an AC adapter (sold separately).
Outstanding ease of use
Electricity output can be seen at a glance (lights up green during output) The switch can be easily operated with only "continuous operation / night only operation / off".
It is also possible to set the operating time
It is also possible to automatically operate "only at night" by sensing the brightness of the surroundings. Can be set with a changeover switch ("Continuous": Operates continuously day and night. "Night": Operates only at night when it gets dark.)
Example of installation method for each animal
Wild boar countermeasures (two-tiered)
Wild boars have very sensitive noses, so the fence should be placed at the height of the nose. *Even if you try to hit the body, the effect will be diluted.
Drive the post (FRP pole in the figure) 20 to 30 cm into the ground. The standard distance between poles is 200-400cm (adjust according to the terrain). Two stainless steel hooks are attached to each pole at intervals of 20 cm. Connect the connecting lines at intervals of 50 meters.
Measures against deer (4 layers)
Install the fence line at a height where you cannot pass through the lower row and at a height where you cannot jump over the upper row.
Drive the post (FRP pole in the figure) 20 to 30 cm into the ground.
The standard distance between poles is 300-400cm (adjust according to the terrain). Attach 4 stainless steel hooks to each pole at intervals of 30 cm. Connect the connecting lines at intervals of 50 meters.
Measures against monkeys (8 columns)
Install it in a position where it cannot jump into, such as a tall tree or a telephone pole. Drive the post (FRP pole in the figure) 20 to 30 cm into the ground.
The standard distance between poles is 300-400cm (adjust according to the terrain). Attach 8 stainless steel hooks per pole at 20 cm intervals. Use two connection wires as a pair and connect them at intervals of 50 cm (+ and - are connected at different levels).
Product line-up
Product specifications
本体入力電源(DC) | ソーラーパネル+充電式バッテリー(付属品)、ACアダプター(別売) |
---|---|
本体出力電圧(DC) | 約9,000V |
本体出力周期 | 約1.0秒 |
本体出力ランプ | 出力されている間緑色に点灯します。 |
本体外形寸法 | (約)巾370mm×奥行210mm×高さ310mm |
本体重量 | 約4.9kg |
付属品 | 本体×1台、専用バッテリー×1個(内蔵)、出力ケーブル×1本、アース棒×1セット、きけん表示板×2枚、取扱説明書×1冊 |