Developed by professionals in the field of pest control, this is a thin stainless steel trap that can be used for both foot and nose traps. It is easy to set up by simply sticking it in the ground without digging a hole, making it one of our most labor-saving traps. It operates with a light load and uses a new system that allows the arm to spring up instantly. This product is especially recommended for those who want to increase the number of catches, regardless of the size of the prey. A test using a prototype by a hunter has achieved 80 harmful captures in 3 months.
Click here to order the spring set alone.
Features of the new tying trap “TSJ”
Easy installation and easy capture.
The unique structure eliminates the need to bury the base. Simply attach the attached plate to the arm and stick it into the ground. Even in places where the ground is hard to dig or on slopes, it can be quickly and easily set up.
The shorter installation time means that there are fewer traces of humans, which makes a clear difference when capturing highly cautious prey.
Catch your prey instantly!
The arm part is equipped with a spring to increase the speed of operation, and the behavior is very speedy. This reduces empty hazing (failure to capture a boar even if the trap is activated).
The trap is designed to operate with a light load, so it has a high capture rate not only for wild boars, but also for animals such as lions, which are considered difficult to capture because of their vigilance and slender legs.
Can be used as a nose tie
Just by attaching the special attachment, it can be transformed into a nose trap. It is also very useful for restricting the movement of the animal after capture. The attachment can be attached simply by tightening a screw.
While the conventional type of traps that require you to pull a rope or wire by yourself require some technique, this product uses the same principle as the foot trap, so you can easily nock the nose.
About the trap
◯ An animal captured by foot nipping can move around for the length of the wire from the rooted post.
o From there, a nose tie is used to further restrict the movement of the beast.
〇 From outside the animal's range of motion, let the snout lead the way and approach it slowly.
◯ The principle of operation is exactly the same as that of ankle trap. Attach the wire to the step board in the same manner as for the ankle trap, and attach the nose attachment. Connect it to a commercially available long pole, etc., and you are set.
Depending on your needs, you can purchase them as a set or individually. Please select one of the buttons at the top of the page and add it to your cart.
A: Tread (ALL stainless steel)
It consists of a plate and a pedestal, both made of stainless steel. The plate and pedestal are connected by wires to prevent loss. The pedestal has four claws to insert it into the ground.
B: Spring set
A complete set of wires and springs for tying the feet and nose of the beast is assembled and attached to the arm part of A: Treading board. It can also be used with other treadmills sold in our store.
C: Nose attachment
If you want to use it as a nose gripper, you will need this attachment: A: It is connected to the treadle with a screw, and by inserting a long stick or other object, you can grip the nose away from the animal.*A stick is not included. Please prepare a long stick of your choice at a home improvement center, etc.
Please check before ordering
The diameter of the trap varies depending on the area where the trapping activity is conducted. This product can be used in the following 3 areas from 1 to 3.
1: Areas where traps with a ring diameter (or short diameter in the case of oval traps) of more than 12 cm are prohibited in order to prevent the misidentified capture of black bears and other predators.
2: Areas where the restrictions in 1 above have been relaxed and traps with a foot ring diameter exceeding 15 cm (or the shortest diameter in the case of oval traps) are prohibited.
3: Areas where traps with a ring diameter exceeding 12 cm can be used to capture the increasing number of wild boars and Japanese deer.
*Regulations may vary by area even within the same prefecture. For details, please contact the local government division in charge of the area where the trapping activity will take place.
|Material of treadle part
|Country of origin
|Stepboard arm size
|short diameter: 13.5cm, long diameter: 16cm
1 review Write a review