This product is recommended for work with knives associated with dismantling after capture, handling wire ropes, and other situations where there is a risk of injury to the palm of the hand. It has top-class resistance of level A7 in the ANSI/ISEA105 cut resistance evaluation*, ensuring safety during dangerous work. You don't have to worry about getting bloody or tingling with normal work gloves. It is also great for cutting trees with thorns.
A material called "SuperFabric®" is placed inside the palm to achieve overwhelming cut and puncture resistance. In addition, the palm has a latex coating on the outside of the palm, so there is no problem with grip. Premium gloves that are surprisingly comfortable to wear, yet flexible and safe from cutlery injuries. Of course, washing is also OK.
*The ANSI/ISEA105 cut resistance evaluation is a U.S. national standard that serves as the selection criteria for hand protective equipment. The weight (grams) is measured until the test blade penetrates the PPE test piece while moving it in a width of 20 mm. is what you do. There are 9 levels (A1 to A9) from 0g to 6,000g, and the degree of cut resistance is classified according to the protective material.
What is SuperFabric material?
Innovative material to prevent serious injury
The super fabric material is manufactured by infiltrating a micro-hard guard plate into the base fabric, and achieves various performances such as high-level cut resistance, abrasion resistance, puncture resistance, flexibility, and light weight. I'm here.
As shown in the photo, it can withstand puncture with a knife.
Sharp dangerous goods are also OK
Gloves that are cut resistant are often not puncture resistant. The manufacturer of this product has been extensively tested in the lab and in the field to ensure that the SuperFabric protective plate with superior anti-puncture technology deter hazards and prevent injury.
Excellent needle resistance
This product also exhibits excellent needle resistance.
SuperFabric material is layered and protection plates built into the fabric stop and deflect sharp hazards from entering, or grooves between the protection plates catch the tip to prevent penetration.
About size selection
- How should I choose the size?
- Please prepare a measuring tape that you can wrap around your palm. Use it to measure the base of your fingers, excluding the thumb, and the circumference of the joint. Measure with your fingers together and your palm outstretched. If the circumference is 19 to 20 cm, the S size should be used. If the circumference is 20 to 21.5 cm, the M size should be used.